Fig. 16: Touch panel showing the slide projector controls

1. Before placing a carousel into the projector turn on the projector from the touch panel with The On/Off button.
2. Next press the Tray Zero button on the touch panel—this ensures that the keyway on the projector will line up to that on the carousel.
3. Insert the carousel onto the top of the projector making sure it seats properly. The projectors are set to accommodate an 80 slide carousel.
4. Once the carousel is fitted on the projector, press the Fwd button to cycle the slides forward; conversely press the Rev button to cycle the slides back.
5. Focus the slides by pressing the Focus + or Focus - buttons.
6. When the presentation is complete, press the Tray Zero button to realign the keyway again to remove the carousel.
7. Press the Off button to turn the projector off.

Fig. 17: Twin slide projectors

Back to Using the Audio Visual Equipment in Lecture Theatres contents page