Courses & Units
Digital Control Systems ZAT116
This unit will be offered subject to minimum enrolment numbers. A decision to continue or cancel the offering will be made no less than one week before classes are due to start.
If you have enrolled and your enrolment will change as a result of this decision you will be contacted via your UTAS email and supported to find an alternate unit to complete your enrolment.
Introduction
In this unit you will be introduced to Digital Control Systems, their applications, and the industries they are applied in. Through case studies and site visits (where possible) you will also investigate the use of digital control systems across a range of contexts. This unit will cover both hardware and software systems in practice, real-time measurement and response, open and closed-loop control, control as a system, and contemporary technology and design concepts. You will have the opportunity to design, analyse and build digital control system elements. This unit introduces learning through practice by exposing you to authentic learning experiences. These experiences are placed at the centre of learning and assessment, so you have the opportunity to develop the skills, knowledge and behaviours necessary to respond to industry, community and/or global needs. You will be introduced to: - a range of methods, tools, techniques and approaches to practice - principles and perspectives such as values, ethics, empathy and leadership in real world scenarios - reflection and deliberative thinking as a means of developing knowledge, skills, attitudes and aspirations - ways of understanding problems and developing solutions through active inquiry.
Summary
| Unit name | Digital Control Systems |
|---|---|
| Unit code | ZAT116 |
| Credit points | 12.5 |
| College/School | College of Business & Economics University College |
| Discipline | Applied Design, Science and Technology |
| Coordinator | Doctor Ali Raza |
| Available as an elective? | Yes |
| Delivered By | University of Tasmania |
Availability
| Location | Study period | Attendance options | Available to | ||
|---|---|---|---|---|---|
| Online | Semester 2 | Off-Campus | International | Domestic | |
Key
- On-campus
- Off-Campus
- International students
- Domestic students
Note
Please check that your computer meets the minimum System Requirements if you are attending via Distance/Off-Campus.
Units are offered in attending mode unless otherwise indicated (that is attendance is required at the campus identified). A unit identified as offered by distance, that is there is no requirement for attendance, is identified with a nominal enrolment campus. A unit offered to both attending students and by distance from the same campus is identified as having both modes of study.
Key Dates
| Study Period | Start date | Census date | WW date | End date |
|---|---|---|---|---|
| Semester 2 | 22/7/2024 | 16/8/2024 | 9/9/2024 | 27/10/2024 |
* The Final WW Date is the final date from which you can withdraw from the unit without academic penalty, however you will still incur a financial liability (refer to How do I withdraw from a unit? for more information).
Unit census dates currently displaying for 2024 are indicative and subject to change. Finalised census dates for 2024 will be available from the 1st October 2023. Note census date cutoff is 11.59pm AEST (AEDT during October to March).
Learning Outcomes
- Explain the application of digital control systems across different industries and contexts.
- Use key theoretical concepts to analyse digital control systems.
- Apply key concepts to design, document and build digital control system elements
Fee Information
| Field of Education | Commencing Student Contribution 1,3 | Grandfathered Student Contribution 1,3 | Approved Pathway Course Student Contribution 2,3 | Domestic Full Fee 4 |
|---|---|---|---|---|
| 031300 | $1,118.00 | $1,118.00 | not applicable | $3,085.00 |
1 Please refer to more information on student contribution amounts.
2 Please refer to more information on eligibility and Approved Pathway courses.
3 Please refer to more information on eligibility for HECS-HELP.
4 Please refer to more information on eligibility for FEE-HELP.
If you have any questions in relation to the fees, please contact UConnect or more information is available on StudyAssist.
Please note: international students should refer to What is an indicative Fee? to get an indicative course cost.
Requisites
Mutual Exclusions
You cannot enrol in this unit as well as the following:
ZAT104Teaching
| Teaching Pattern | Two to three on campus practical sessions per semester (2-3 hours per session). |
|---|---|
| Assessment | AT1: Case Study (20%)|AT2: Project Proposal (30%)|AT3: Project Report (50%) |
| Timetable | View the lecture timetable | View the full unit timetable |
Textbooks
| Required |
Required readings will be listed in the unit outline prior to the start of classes. |
Links | Booktopia textbook finder |
|---|
The University reserves the right to amend or remove courses and unit availabilities, as appropriate.