18 July 2022
About the research project
Innovative thermal and hygrothermal research conducted at the University of Tasmania since 2006 has provided technical guidance for Australian regulatory and policy development. This has included technical advice for the Nationwide House Energy Rating Scheme (NatHERS), the regulator Australian Building Codes Board), State Governments and the design and construction industry.
Key considerations for zero-energy and net-zero carbon buildings include:
- Building envelope thermal performance
- Whole of building hygrothermal performance
- Construction material hygrothermal performance
- Whole of building life-cycle assessment
- Whole of region GIS-informed planning.
However, national and international research has shown that some specific methods intended to advance a low carbon future may actually be creating interior environments that promote the occurrence of cardiovascular and respiratory human health conditions both short-term and life-long, and reduce the usable lifespan of the built environment.
The hygrothermal research team at UTAS focusses on this nexus between the need to move toward a zero carbon future combined with providing durable and heathy interior and exterior environments. Within this research field, prospective students will evaluate and use state-of-the-art simulation tools and experimental methods to develop a deep technical understanding of building physics and provide new knowledge to inform ongoing guidance to Government and Industry.
Ideally, and due to their complex nature, individual projects should only focus on one of two of the five fields listed above.
Primary SupervisorMeet Dr Mark Dewsbury
Applicants will be considered for a Research Training Program (RTP) scholarship or Tasmania Graduate Research Scholarship (TGRS) which, if successful, provides:
- a living allowance stipend of $28,854 per annum (2022 rate, indexed annually) for 3.5 years
- a relocation allowance of up to $2,000
- a tuition fees offset covering the cost of tuition fees for up to four years (domestic applicants only)
If successful, international applicants will receive a University of Tasmania Fees Offset for up to four years.
As part of the application process you may indicate if you do not wish to be considered for scholarship funding.
Applicants should review the Higher Degree by Research minimum entry requirements.
The project is competitively assessed and awarded. Selection is based on academic merit and suitability to the project as determined by the College.
Additional essential selection criteria specific to this project:
- Applicants must have established skill in building physics and its relationship to building thermal and hygrothermal performance and building simulation
Additional desirable selection criteria specific to this project:
- Applicants must be able to demonstrate strong research and analytical skills
- Applicants must meet English requirements, or be able to do so before commencement
There is a three-step application process:
- Select your project, and check you meet the eligibility and selection criteria;
- Contact the Primary Supervisor, Dr Mark Dewsbury to discuss your suitability and the project's requirements; and
- Submit an application by the closing date listed above.
- Copy and paste the title of the project from this advertisement into your application. If you don’t correctly do this your application may be rejected.
- As part of your application, you will be required to submit a covering letter, a CV including 2 x referees and your project research proposal.
Following the application closing date applications will be assessed within the College. Applicants should expect to receive notification of the outcome by email by the advertised outcome date.