Introduction
This unit will develop the drafting skills and design knowledge of the student. At completion, the student will be competent to obtain any required information from engineering drawings produced to international standards and conventions. The student will also be able to produce drawings of an adequate standard using CAD tools for the manufacture of marine components and its system. Besides, they will possess knowledge of design and drafting principles which will enable maximum benefit to their intermediate and advance engineering unit. This unit will develop the drafting skills and design knowledge of the student. At completion, the student will be competent to obtain any required information from engineering drawings produced to international standards and conventions. The student will also be able to produce drawings of an adequate standard using CAD tools for the manufacture of marine components and its system. Besides, they will possess knowledge of design and drafting principles which will enable maximum benefit to their intermediate and advance engineering unit. This unit meets the requirements for knowledge, understanding and proficiency set out by the Maritime Training Package, the STCW 2010 (Manila Amendments) and Table A-III/1 of the STCW Code.
Summary
| Unit name | Engineering Design and Presentation |
| Unit code | JNE122 |
| Credit points | 6.25 |
| College/School | Sciences and Engineering Australian Maritime College |
| Discipline | Seafaring and Maritime Operations |
| Coordinator | Mr Muhammed Iraz |
| Available as an elective? | No |
| Delivered By | University of Tasmania |
| Level | Introductory |
Availability
Specific information on 2027 unit availability will be available in August
Learning Outcomes
- Interpret marine machinery and system drawings.
- Use general engineering terms and symbols and in particular those used in marine engineering to simple design tasks.
- Use CAD to produce working drawings of basic components of marine machinery to demonstrate the ability to apply the principles of projection using relevant Australian standards.
- Demonstrate an operational and proficient level of communication through sketches components in the first and third angle projection to the required Australian Standards.
Fee Information
2027 fee information will be available in August.
Teaching
| Teaching Pattern | 2 hrs lecture + 1 hr tutorial per week |
|---|---|
| Assessment | Machine Part Design Task 1 (20%)|Machine Part Design Task 2 (20%)|Machine Part Design Task 3 (60%) |
| Timetable | View the lecture timetable | View the full unit timetable |
Textbooks
| Required |
Required readings will be listed in the unit outline prior to the start of classes. |
|---|---|
| Recommended | Boundy, AW 2012, Engineering drawing, 8th edn, McGraw-Hill, Sydney. Tremblay, T 2011, Autodesk Inventor 2012 and Inventor LT 2012 essentials, John Wiley & Sons Incorporated, Hoboken. Available from: ProQuest Ebook Central. Waguespack, C 2012, Mastering Autodesk Inventor 2013 and Autodesk Inventor LT 2013, John Wiley & Sons Incorporated, Indianapolis. Available from: ProQuest Ebook Central. |
The University reserves the right to amend or remove courses and unit availabilities, as appropriate.